Glossary of Terms for Chemicals

• A
• B
• C
• D
• E
• F
• G
• H
• I
• J
• K
• L
• M
• N
• O
• P
• Q
• R
• S
• T
• U
• V
• W
• X
• Y
• Z

a

Acid

Liquid (muriatic acid) or dry granular (sodium bisulfate) substance used to lower the pool's pH (toward a more acidic condition) or to lower total alkalinity levels. 

Algae

Over 20,000 species known to man! Algae may form on your pool surfaces or it may bloom in suspension. We typically know algae to be green, but it may also be yellow (mustard algae), black, blue-green or any shade in between. It may form separate spots, or seem to grow in sheets. Pink algae, is not algae at all, but a form of bacteria. Algae are living, breathing organisms that need warmth, sunlight and CO2 to thrive. 

Algaecide

Meaning: to kill algae. Algaecides perform best as a backup to a routine sanitation program. They also help to kill airborne spores as they blow into the pool. A variety of algae treatment products are available including copper and silver compounds, poly-quat compounds, chlorine enhancers , and herbicides.

Alkalinity

Alkaline refers to the condition where the water's pH is above 7.0 (neutral) on the pH scale. It is the opposite of acidic. Alkalinity is the amount of carbonates and bicarbonates in the water, measured in ppm of Total Alkalinity.

b

Bacteria

From a health perspective, the most dangerous micro-organisms which may be living in the pool water. Some are pathogens, which can cause infectious diseases.

Balanced Water

Balanced water is the result when all of your chemical parameters are where they should be, and thus "balance" each other. The key components of water balance are pH, Total Alkalinity, Calcium Hardness and Temperature.

Breakpoint Chlorination

When you shock your pool, the goal is to reach a high enough level of free chlorine, measured in ppm, to break apart molecular bonds, specifically the combined chlorine molecules. When breakpoint is reached with sufficient additions of chlorine, everything in the pool is oxidized.

Bromanines

A combined bromine - ammonia molecule. Unlike chloramines, which are strong smelling and offer no sanitizing properties, bromamine compounds continue to sanitize.

Bromine

A member of the halogen family, commonly used as a sanitizer in spas, because of its resistance to hot water with rapid pH fluctuations.

Buffer

A base such as Sodium Bicarbonate (Baking Soda), added to your pool will increase alkalinity which increases the buffering capacity of the pool; or, your pool's resistance to pH change.

c

Calcium Carbonate

Known as scale, crystalline deposits of calcium may form on your pool surfaces, equipment, or even line your pipes like cholesterol in your arteries. Properly balanced water can prevent this.

Calcium Chloride

The flaked calcium salt used to raise levels of Calcium Hardness in your pool water. Also good for snow melting.

Calcium Hardness

A titration test is used to determine levels of the mineral calcium dissolved in the pool water.

Carbonate

Primary in the make up of total alkalinity and TDS.

Chloramines

The chlorine molecule is strongly attracted to nitrogen and ammonia. When these two hook up, they form a chloramine, which are undesirable, foul smelling, space taking, compounds that require shocking the pool water to get rid of.

Chlorine

A member of the halogen family of sanitizers, it's use in swimming pools is in the elemental form of a gas, or as a liquid, granular or tablet compound. When added to water it acts as an oxidizer, sanitizer, disinfectant and all around biocidal agent.

Chlorine, combined

That portion of total available chlorine left over when free available is subtracted. The measure of chlorine which has already attached itself to other molecules or organisms. Most of this is made up of chloramines.

Chlorine, demand

The quantity of free available chlorine removed during the process of sanitizing. The amount of organic and non organic material contained in the water will "demand" a certain level of oxidizer to be destroyed.

Chlorine, free available

Free, available chlorine is that which is active, not combined with an ammonia or a nitrogen molecule, and ready to react to destroy organic material

Chlorine, total available

The sum of combined and free chlorine levels. With a DPD test kit, one determines free available level, then total available. The difference, if any, is the level of combined chlorine

Clarifier

A clarifier is a chemical used as a coagulant of suspended microparticles. Helps the filter by clumping smaller particles into filterable sizes.

Coagulent

The properties of a chemical used in the assemblage and precipitation of suspended material which may make the pool appear cloudy.

Conditioner

Also called Cyanuric Acid (CYA) or stabilizer, this chemical provides a shield from the sun around the chlorine molecule, extending the efficacy...aka; saving you money.

Contaminants

Any microparticle or organism which reduces water clarity or quality or presents health hazards. All of our filtering, circulating and sanitizing is directed here.

Copper

An effective algaestat and algaecide, copper as elemental is used in many pools in products like Long Life Algaecide.

Copper Sulphate

Similar to aluminum sulphate, this chemical provides a coagulating and flocculent function in water. Used in ponds. This amount of copper would stain swimming pools.

Corrosion

The effects of a acidic pool environment, one in which the pH and/or alkalinity are very low. Corrosion in the form of etching, pitting or erosion of pool equipment and surfaces is the result.

Cyanuric Acid

A granular chemical added to the pool water which provides a shield to chlorine for protection from UV radiation, which disrupts the molecule, destroying its sanitizing ability.

d

Directions

What you should read before using any chemicals

Disinfectant

Chemicals or processes which work to destroy vegetative forms of microorganisms and other contaminants. Examples are chlorine, bromine, Soft-Swim, ionizers and copper and silver algaecides.

DPD

A method of testing for chlorine levels in the pool water. Unlike OTO, DPD testing allows determination of total and free available chlorine levels, which, through subtraction, gives us combined levels.

Dry Acid

Sodium bisulfate, a granular form of acid , used to lower pH and alkalinity in the water. Safer and less caustic than muriatic acid. Usually available as a "pH decreaser.

e

Efficiency

The power to produce an effect. Chlorine's efficacy is affected by many factors, including the sun, water balance and the water's chlorine demand.

Enzymes

Used in swimming pool formulations designed to break down and digest oils in a pool or spa similar to the way enzymes are used in oil spill clean-up efforts.

f

Fill Water

Used in filling or adding to the water level. Whether from the hose or from a well, your fill water brings its own chemical make up and water balance (or lack thereof).

Flocculant

Essentially the same as a coagulant, this chemical (such as alum) is used to combined suspended alkaline material and/or algae into a heavy gel, which sinks to the bottom for vacumning.

Foaming

A term used to describe surface foam on your water, esp in spas/hot tubs. Foaming is caused by high TDS levels working in combination with soft water and oils. Certain low grade algaecides can foam when added to pool or spa. Use enzymes for foam control.

g

h

Halogen

A member of the family of elements fluorine, bromine, chlorine and iodine.

Hard Water

That water which is high in calcium hardness and other salts which, as such, resists soap being lathered.

Hypochlorite

A family of chlorine compounds such as Calcium Hypochlorite and Lithium Hypochlorite, both granular, and the liquid Sodium Hypochlorite. When these compounds contact water, they release Hypochlorous Acid, the active sanitizing agent.

i

Iron

Usually introduced into the water from iron plumbing or from well water, Ferric Iron can stain surfaces, while Ferrous Iron will turn your water a clear green color.

Ironizer

An ionizer is a device mounted on your return line, and through which water flowing will receive charged metal ions. Manufacturers may use a copper anode and/or silver. Copper is an algaecide and algaestat, while silver is known for its properties as a bactericide. This electric, limited technology has been replaced by the Vision System.

j

k

l

m

Minerals

Such as Calcium, Manganese, Magnesium, Nickel, Copper, Silver, Iron, Cobalt or Aluminum. Their presence in high non-chelated concentrations can lead to stains & scale when conditions are right.

n

Nitrogen

When combined with chlorine, nitrogen creates chloramines, which do not belong in our pool. Nitrogen can be found in many swimmer wastes (perspiration, suntan oil, hair tonics, etc.) or be introduced by other means.

Non-Chlorine Shock

A granular form of potassium permonosulfate, used to oxidize materials such as microorganisms, contaminants or chloramines.

o

Oxidation

The "burning up" of organic waste and compounds in the pool water. It also refers to what you may see on your metal pool surfaces if your water is corrosive. Rust is a form of this kind of oxidation.

Ozone

The molecule containing three atoms of oxygen; known to be a very powerful sanitizer. Ozone producing equipment creates this molecule by UV radiation or corona discharge generators.

p

PH

The scale of relative acidity or alkalinity, expressed in logarithmic numbers from 0 - 14, with 7.0 being neutral. What's really being measured is the hydrogen ion concentration. Some would say pH stands for Power of Hydrogen.

Polymer

An algaecide / algaestat made up of repeating polymer molecules. Used for green algae and available in varying strengths.

Potassium Perminisulphate

See Non-Chlorine Shock

PPM

Parts per million. A method of assigning value to certain concentrations of chemicals in the water. For example, alkalinity should be kept at 80-120 parts per million, by weight and in relation to the water it's dissolved in.

Precipitation

To precipitate is to come out of solution; become insoluble by result of chemical action. Material forced out of solution, purposefully or accidentally, will then settle, stain or scale, or remain suspended in the water.

q

Quaternary Ammonium Compound

A type of algaecide composed of ammonia compounds. Effective algaestat for green and blue/green algae.

r

Reagent

The chemical indicators used in testing water balance. (All the little bottles or tablets in your test kit).

Residual

Usually refers to free available chlorine levels remaining in the pool after initial treatment or activity with contaminants. 

s

Sanitiser

A chemical agent used to remove unwanted contaminants.

Scale

Usually whitish in color, scale forms on pool surfaces and equipment when mineral salts are forced out of solution. A scaling condition is one in which calcium hardness, pH and/or alkalinity levels are out of balance.

Shock

As a noun it loosely describes the products used in shocking, such as hypochlorites, potassium permonysulfate or hydrogen peroxide. As a verb it describes the act of bringing the sanitizer level up so high that breakpoint chlorination is reached. When breakpoint is reached, a "shock" or perhaps a "lightning bolt" is a better analogy, is sent through the water, tearing apart molecules and slashing through cell walls. Ultimate purification, man.

Slurry

A soupy mix of chemicals in hot tub water, usually in a dedicated plastic bucket or watering can.

Soda Ash

A base, used to counteract an acidic condition by raising pH.

Sodium Bicarbonate (baking Soda)

Another base, however its properties will increase alkalinity more than pH. Used to raise Total Alkalinity levels.

Sodium Bisulphate

An granular form of acid, used to counteract a scaling condition by lowering pH and/or alkalinity.

Sodium Drichlor

A granular form of chlorine that is stabilized with cyanuric acid. Used for shocking and superchlorination.

Sodium Hypochlorite

Liquid chlorine used in pools, identical yet stronger than Clorox bleach.

Sodium Tetraborate

New technology that renders algae incapable of processing carbon dioxide, which they need to live.

Soft Water

Water that has low calcium and/or magnesium content. Soap lathers easily in soft water.

Stabiliser

See Cyanuric Acid. Stabilizers, also called conditioners, can be added directly to your pool to extend your chlorine efficacy. Cyanuric acid is already added to certain "stabilized" products such as Trichlor tablets and Sodium Dichlor.

Super-Chlorination

Applying 7 - 10 times the normal amounts of chlorine to the pool as an added "boost" for contaminant removal. Some refer to superchlorinating as being less than shocking, in that breakpoint thresholds are not reached, or the terms may be used synonomously.

Swimming Pool Test Kit

These are kits which you use to test the water for ph/chlorine/bromine/ta etc. They are noce and simple to use and there are also digital test kits availble. Another form available is the test strips.

Swimming Pool Test Strips

This is another form of testing the pool water. Basically there are strips that you dip into the pool water,(litmus paper), and once taken out of the water, then changes colour and that matches to a colour on the chart, to give you a reading.

t

Total Alkalinity

The ability of the pool water to resist changes in pH. The "buffering" capacity of the water. Additions of Sodium Bicarbonate will increase the levels, expressed in ppm.

Total Dissolved Solids (TDS)

A measure of everything that has ever dissolved in the water; all the matter that is in solution. High TDS levels can oversaturate your water, causing all sorts of reactions.

u

Ultra Violet Light Treatment

Using UV wavelength radiation to destroy contaminants in water. UV light is also used to create ozone molecules for the same purpose.

v

w

x

y

z